Agreement - Service Trucks International - 2013-07-31 •
''' :, t Costa !7VIesa Sanitary District
,,,„„.„,,:„.:-1 d " J
,, ;f, . . , an Independent Special'(District
PURCHASE ORDER
PO No.: 00001407 •
Date: 07/01/2013
VENDOR: SHIP TO: BILL TO:
Service Trucks International,wholly
owned division of Sioux Automation
Center,Inc.,an Iowa corporation Costa Mesa Sanitary District Costa Mesa Sanitary District
877 1St Avenue N.W. 628 West 19th Street 628 West 19th Street
Sioux Center,IA 51250 Costa Mesa,California 92627 Costa Mesa,California 92627
Attn:Jim Berkenpas,Sales
Representative
VENDOR NO. VENDOR PHONE NO. TERMS DATE REQUIRED DELIVERY DATE
SHIPPING INSTRUCTIONS
(none)
ITEM QTY U/M DESCRIPTION/TASK PROD CODE UNIT PRICE AMOUNT
1 each UTILITY TRUCK $143,317.74 $143,317.74
PER EXHIBIT A
TOTAL P.O.AMOUNT:
$143,317.74
SUBTOTAL $143,317.74
TOTAL TAX' INCLUDED
SHIPPING 00.00
TOTAL $143,317.74
AUTHORIZED BY: F:11.1 .-17/)/"4/1—
g(1111- , DATE: g ! 3
This purchase order is not effective without an authorization signature. Facsimile signatures are acceptable.
This purchase order is not a contract until it has been accepted. Acceptance is subject to the following:
1. The person accepting warrants that they have authority to accept on behalf of the company or business.
2. This purchase order is subject to all of the Terms and Conditions that are stated separately but incorporated herein unless this
purchase order specifically states otherwise.
3. All goods must be new unless specified otherwise and be subject to any testing described in the Terms and Conditions.
4. Risk of loss, insurance, shipping charges, taxes, and point of delivery shall be as specified on this page or as provided in the
Terms and Conditions.
Acceptance •
The provisions of this purchase order,In uding the separately stated Terms and Conditions,are accepted by my signature.
Electronic acceptance may.be . . ides by electronic signature,faze. signature,or other electronic form of acceptance that identifies the
person accepting on behalf of e co,.any or business. My i cept• a warrants that I have the authority to do so. /
ACCEPTED BY: ���//G ' !/_.L�,4, _ DATE: 7-f'1f
(Prote>rti,ig our co am city'sv health and t fie environment by pawn-ling solid waste and seu;er collection services.
'cwarm crosd ca.go v
TERMS AND CONDITIONS
1. There is no acknowledgement copy of this purchase order. Any discrepancies in price, items or delivery, must be phoned to •
buyer's purchasing department within 48 hours of your receipt of this purchasing order.Any correspondence referring to the items,
prices and conditions of this order must be directed to buyer's purchasing agent,inquiries relative to payment of invoices should be
directed to buyer's accounts payable.
2. Buyer furnished or paid for items:All artwork, specifications, tools, equipment and other items furnished to seller, or paid for by •
buyer shall(A)remain buyer's property or upon acquisition by seller shall become buyer's property; (B)Be safely kept by seller in
good and usable order,(C)Be promptly returned to buyer.
3. Seller is performing as an independent contractor and, thus, shall hold the buyer, its officers, agents, and employees, harmless
from liability of any nature or kind, on account of used invention articles,process for work on labor performed under this purchase
order.
Insurance: Sellers shall maintain insurance acceptable to buyer in full force and effect at the seller's expense throughout the term
of this contract.
4. Freight: Excessive charges from incorrect description or from routing other than given will be charged to seller's account. Packing
list must accompany each case or parcel, showing buyer's order number. No charges for transportation containers, or any other
purpose,will be allowed unless so specified in this order. Freight changes allowable pursuant to the terms FOB point or origin or
FOB destination plus freight shall be prepaid by the seller and must be itemized on the invoice, and a copy of the paid express or
freight bill shall be attached to the invoice.COD shipments will not be accepted.
5. Rejections: If any of the goods are found at any time to be defective in material or workmanship,or otherwise not in conformity with
the requirements of the order buyer, in addition to any other rights which it may have under warranties or otherwise, shall have the
right to reject and return such goods at seller's expense, such goods not to be replaced without written authorization from buyer's
purchasing agent.Where quality is questioned on any delivery,any cost of inspection will be against the account of the seller.
6. Responsibility for supplies: Seller shall bear the risk of loss or damage to the articles covered by this order until delivery of said
supplies at the location designated by buyer or at such other place as may be designated herein regardless of FOB point or the
point of inspection.Seller shall also bear the risk of loss or damage to supplies after buyer gives seller notice of rejection.
7. Charges: Buyer may by written order or at any time prior to final delivery, and without notice to sureties,make changes within the
general scope of this order in any of the following:Applicable drawings,designs,or specifications, method of shipment or packing,
and pace or time of delivery. To the extent such change causes an increase or decrease in the cost of or time required for the
performance of this order an appropriate equitable adjustment in this order shall be made.Any claim by Seller for adjustment must
be asserted within fifteen (15) days of receipt of the change. Failure to agree to an adjustment shall not excuse the Seller from
proceeding with this order as changed.
8. Buyer shall have the right to cancel at any time for Seller's breach of any provisions of this order, including failure to meet the
stated delivery schedule.All or any portion of this order may be cancelled by buyer if seller, in buyer's judgment, is failing to make
sufficient progress so as to endanger performance of this order in accordance with its terms. Buyer reserves the right to terminate
the contract without penalty without cause if ten(10)days notice is given or immediately with cause.
9. If seller breaches this agreement and fails to deliver the goods,services or materials provided herein within the time above set forth
or by failing to make sufficient progress so as to endanger performance of this order, then buyer may terminate this contract and
purchase the goods,services or materials from whatever source and seller shall be liable to buyer for the difference in price which
buyer is obligated to pay plus all of its costs and expenses in enforcing its rights hereunder. Further, buyer may offset any such
costs or expenses incurred against any of the monies,which may be owing to the seller.
10. Anti-Discrimination Claim: It is the policy of the buyer that in connection with all work performed under public works, and
purchasing contracts,there be no unlawful discrimination against any prospective or active employee engaged in the work because
of race, color, sex, ancestry, national origin, or religious creed, and therefore,the seller agrees to comply with applicable federal
and California laws including, but not limited to the California Fair Employment and I-lousing Act beginning with Government Code
section 12900. In addition,the seller agrees to require like compliance by all sub-contractors employed.
11. Any controversy or claim arising out of or relating to this purchase order or the breach thereof, shall be settled by arbitration at
election of either party in accordance with the rules of the American Arbitration Association and judgment upon the award rendered
by the arbitrator(s)may be entered in any court having jurisdiction thereof.
12. Buyer's purchase order number must appear on all packages,invoices, and correspondence.
13. Deliveries for all departments must be made as directed. Non-payment may result from merchandise delivered in any other
manner.Cash terms shall be predicated on the delivery date of the material as specified or from date correct invoices are received
in buyer's accounts payable office,if the later date is later than the date of delivery.
14. Seller agrees to furnish buyer with two-shop maintenance and two operational manuals(which will include writing schematics, part
diagrams,alignment date,and parts list)on all purchases of equipment.
15. Warranty:Unless otherwise specified,warranty on quoted equipment shall be one(1)year defective parts and/or workmanship.
16. Seller agrees to make available special replacement parts required to maintain the purchase equipment unless otherwise
stipulated at the time of equipment order.
17. Seller guarantees and agrees to indemnify, defend and hold harmless the buyer against any or all loss, liability, damages,
demands, claims or costs arising out of defective material and products. This guarantee is in addition to and not intended as a
limitation on any other warranty,express or implied.
18. No assignment by the seller of the purchase order or any part hereof, or of funds to be received hereunder will be recognized by
the buyer unless such assignment has had prior written approval and consent of the buyer.
- . -... ... .
A.. ... .......4...._, 2
..
PRO 2
. .. .. . ...
.. . _ . , ..
...... Bo ,
SERVICE
....____.,_ ____::. , 5
...; u 8Ug1 gip_.... tomt —�SitIl 1 's T�`
p �
i , '
_ �.
pa
s
' rq
3
T f 6 1 I —
K Y nor tli=l' 1 .._- .1 ,® m '—. ,,i' ::s t; _ ® �'Y, � 1+L
r+' ? ® - ! I..rem y_� � �� f_ �
1 i n rr:r 0ii�dl a -- �
y. f
.571).
^ls: e "?' r '^?Vii. K«'iij:?? . z?,:'f:.
j _C! Service Trucks International designs and manufactures
..,....:. „.......... .,, .. GLE PR _ service bodies that are built to endure the harsh conditions
... .. . t.E4:c
:::�:,::::__.._x._:x':3::;; ,• ?_ ;,x..riigy ; of the heavy equipment service industry. Choose from
standard configuration bodies, or custom built and
engineered to meet your specifications. STE bodies and
2252 equipment will stand the test of time and maximize your
Features a return on investment.
° 50,000 ft lbs torque capacity ° Stainless Steel Grab Handle
° 11 Ga A60 Galvaneal Cabinet Construction ° Integrated Full Length Drip Rail
° 11 Ga A60 Galvaneal Single Panel Doors • Galvanized Infinitely Adjustable Shelving
° A60 Galvaneal Treadplate Deck, Back &Top of ° Pressurized Cabinet Compartmet is
cabinets 0 Central Wire Junction and.Fuse Panel
° Full Length C Channel Long Sills ° Wire Harnesses protected with loom and assembled
° Integrated Reinforced Crane Tower with sealed connections
° Enclosed outrigger system ° Powder Coated Components
° Vise Mount ° 60" Oxy/Ace Cabinet with Tie Downs &Vent
° Stainless Steel Hinges ° (4) Deck Flush Mount Tie Downs
° Stainless Steel Door Handles a Cat IV 2" Receiver Hitch & 7 Prong Receptacle
° D Handles with 3 point positive locking °-PPG Delfleet Polyurethane paint System
° Bulb Type Automotive Door Seals ° Fully Undercoated
° Stainless Steel Front Chip Guard ° Backup Alarm
11
Standard Specifications: Top View
, .
_
: 2.2
1
22" Deep Cabinets
,,
4 +
1
0 52" Overall Cabinet Height
■ .
a 51" Deck width (Clear)
, .
a 31" Deck Side Height _ii- - +
,
0 95" Overall body width
' —
17,500 to 19,500 GVW Required
- _ )2
idc.....
Drivers Side View Passenger S'1 de View
— - I
akcormots .,,,
-- ----' i
1— — -----
37 lii i 11 .;7:: '
[Ea-
■ 1
I .1.
i. • 4-A 1 6 P li ,t3 -
I if _.9,....._<-- 1 r- 1
i rtfil
2 I i I: , T
,
I
; 1-- ;. i
I •
1. ■ — '\ I tItta ,
.-- .,, 1 .7 '1. 7 25
2; '• I ■ J i
. , i ' I ■ 7. .1 i 1, I . i' ' __, I
1' '. '' 47 --••■•••—36---•-• " k..
II
a 7 -----.........29 --- ■ .
L.----
. 21
13 .. I ... 22 -
-- -
■3:
'-'--- .CA ---
......... 1! .. 13 " .. .,.,
. 712
I67I..----.--.-. _1„ _____--- -.2
Accessories
..,„.
:;:.11 ,-,,,..:1i ...z.% '-
It. - '1h i
'1!•,..:ti-, lil._', •---=-•--"-'4.---7.-- :4
.41 ;$' , dS4', SC,
7600 V ..4,',., • f.:.,-
- ....,7: .•
..-.-' , ," '..-.1
..*:..;........ ,..p: ,;..'-, - IriN '-414.1111 ,® '
7--;*-"-"4--"-'''''t'.'2,;-.7.14 ; '-, ,1-7,7.7z,-,-.--a...........,, '''' '0, t ,--:-..'" ' E . - .- -
12'..,-: -..*"9,Al. 1..:. .:.; 'n.--R :f — -4.,tilic?.;..a21.4w:4„..+.„,...-.,„ .._ . . ....
141 ---iiiar.. I'ls,',-.4.4-1...: %Ti''
art-"14.14q4kr.=PV,4.1:-, t 1.%
' ''''% -''' ,,
ii 1 •:4111-tiel k..4.. ..',I.''''''..';'"i .. ,..; :
Fold Down Tailgate
Tiger Crane Compressor Systems
;.. '
,... ........:' - "_"If:—: --A0714 ' '*',"'A.4.4
lar.*,:.u...."4:... ''''''-.... -
,.. ..:.4.4:14
171 40 ,
, -=
....,.,. - 1 ,... -
Sliding Deck Cover
,._..,
Masterlock Roll Outs and Bolt Bins
Designed and Mfg in the USA by
. . . .
:...a."..-" 5-E-Jb'' SERVICE
Service Trucks International
INTERNATIONAL 877 1ST AVE NW
SIOUX CENTER IA 51250
3":11 ,1r...,11.':`2-4%,-. 0 1-800-225-8789
-
..,v.,
... ----iMGLEPRV- FAX: 712-722-3706
i...1, -,--24.14g.
- www.servicetrucks.com
12
Exhibit A
CONTRACTOR will construct a Ford 750 crew cab chassis automatic utility truck (Eagle
Pro II 2252) with Tiger crane body. In addition, Truck will include the following
specifications.
BODY
1. Modular lighting package - all wiring connections soldered and enclosed in shrink-
tubing or equal. If equal please explain on separate sheet.All wire ends are tinned
before insertion into plugs or equal. If equal please explain on separate sheet. All
plug connections are completely sealed and weather proof. Entire assembly is
enclosed in a continuous plastic loom to form a one-piece harness or equal. If equal
please explain on separate sheet. Lighting package is completed with sealed
polycarbonate lenses and housings affording superior impact and heat protection,
flush-mounted in rubber grommets, as follows:
® Two (2) clear back up lights or equal. If equal please explain on separate sheet.
® Two (2) red stop/turn/tail lights or equal. If equal please explain on separate
sheet.
® License plate light.
® Wiring harness assembly.
® Backup alarm, wired through backup fight.
2. There is to be a "tool holder" installed on top of the curbside body. The tool holder
design and installation shall be approved by the DISTRICT before installation
begins.
3. Tail lights color coded and mounted in sealed-type rubber grommets shall be
installed.
ACCESSORIES
4. 2"trailer hitch
5, All in one power box unit that must include a welder, air compressor and a generator
6. One cone rack
7. Mounted traffic arrow board with strobes. Traffic arrow board location and
installation to be agreed on by the DISTRICT prior to installation
13
PSA 12 10
8. AM/FM/CD/Sync radio with two (2) speakers (to include a digital clock), bench seat,
full
9. Air conditioning
10.Pressure washer. Pressure washing equipment and installation to be agreed on by
the DISTRICT prior to installation.
INSTALLATION
11. Color to be white
12. Paint complete unit to match the cab. Apply non-skid, painted on materials, tape
will not be accepted, to all walking surfaces.
TRUCK CAB AND CHASSIS
13. 13GVW-26,000 lbs.) capacity.
14. Front axle- 10,000 lbs. capacity.
15. Rear axle - 21,000 lbs.) capacity.
16. Cab to axle - 84".
17. Engine—Cummins, minimum 6.7L 1-6 OHV diesel injection 24 valve intercooled
turbo diesel engine. The transmission shall be a 6 speed automatic.
18. Brake type—Air
19. Suspension type—Spring
20. Exhaust style- vertical
21. Fuel tank- 50 gallon total capacity.
22. Steering - Full power steering.
23. Tires, radial, highway tread front, traction tread rear, as required to meet axle
ratings. Tires shall be front and rear radials.
24. Fresh air heater w/integral windshield defroster and central controls.
25. Stainless steel mirrors. Brake away mounted on each side.
26. Fire extinguisher, 5 lb., ABC type, with a bracket, mounted in first street side
compartment.
27. Windshield Wipers and wipers with intermittent speed control.
14
PSA 12 10
28. Steering wheel shall be tilt type.
CRANE SPECIFICATIONS
29. 62,000 ft/lb. —crane rating
30. 21' reach
31. 11,000 lb. lift capacity
32, 12-21' hydraulic boom extension
33. 23' lifting height (from base of crane)
34. 41' storage height (from base of crane)
35. 157" overall storage length
36. 2070 lbs. operating weight
37. 23"x 30" mounting space required (for base of crane)
38. 20.4" rotation operations space required (from center of crane)
39. 8 bolt pattern (for base of crane)
40. Power coated base, turret shield and inner boom with PPG delfleet polyurethane
paint on remainder of components.
41. Standard wireless proportional control with engine start and throttle control
42 Standard overload protection with overload indicator light
42. Standard anti two block protection with condition indicator light.
System Characteristics
43. 10 GPM @ 2600 hydraulic supply requirements
44. Open centered, full pressure hydraulic system
45. Integrated 9 micron absolute filtration with bypass condition indicator light
46. Full proportional input with Auto II Speed Load Sensing Control reduces all
function speeds when load is sensed
15
PSA 1210
47. 400 degrees rotation
48. 12 VDC DO3 10 GPM Solenoids with manual override
49. 5 degrees to +75 degrees boom elevation positions
50. 30 seconds boon elevation speed
51. 22 seconds boom extension speed
52. 1.4 RPM Rotation speed
Winch Characteristics
53. Hydraulic planetary winch
54. 7/16"X 120"winch cable
55. 60 FPM single line no load speed
16
PsA 1210
•
TAGLEPROI SERVICE c :t.
°' TRUCKS
INTERNATIONAL TIGER
America's Premier Manufacturer 877 1st Ave.NW•Sioux Center,IA 51250 R l''i N E S
of Service Equipment Phone:712-722-722-3711 •Fax:712-722-3706
www.servicetrucks.com CALL TOLL FREE: 1-800-225.8789 www.tigercranes.com
July 1,2013
Costa Mesa Sanitary District
628 West 19th Street
Costa Mesa, CA 92627
To Whom It May Concern,
This memo states that James E. Berkenpas is authorized to sign on Costa Mesa's Sanitary
District's purchase order#00001407.
Thank you.
4,4
Mickey isser
Chief Financial Officer
Service Trucks International
(866)722-1488 x170
S
Sales SM1eet Rev 10/1/2012 rev 2-21-10
SERVICE Sold By: Service Trucks International Dist#: 1
TRUCKS 877 1st Ave NW Quoted By: Jim Berkenpas
INTERNATIONAL Sioux Center IA 51250 Quote Date: 6/14/2013
Ph (800)225-8789 Est Lead Time: 90 Days
_ Fx (712)722-3706 From P.O.
3" 0 www.servicetrucks.com Level#3
,r GLE PRO: Quotation is valid for 90 days beyond
SERVICE EQUIPMENT QUOTE PREPARED FOR: the quote date above.
pltl NAME: COSTA MESA SANITARY DISTRICT Call
e CONTACT Steve Cano "Sewer Maintenance Supervisor"
ADDRESS: 77 Fair Drive
CITY Costa Mesa
`I sr STATE
California
i ZIP 92626
TIGER PHONE 949-548-7505/949-281-6785 Cell
CRANES FAX 949-515-1534
EMAIL scanot crosdca.gov
Qt Description
Bod T pe ,..
2452 Work Ready, 84 CA, Eagle Pro II 72k ft/lb Crane Body with 22"
1 ea STI592357 Workbench and Full Hyd Extend and Up/Down Outriggers. Raised 60"
CS Cabinet for 0/A. Will mount on 25k+ GVW chassis with 22.5 tires.
Built Per Dwg#'s: 100294A-100295A-100296A TOP AND SIDE VIEWS
Body Installation & Chassis Modifications .
* ICC safety kits are included with all mounted chassis
1 ea 26k GVW Chassis Spring Suspension
1 ea Ford F650/F750 Vertical Exhaust Modification
1 ea Battery Relocate - Universal with Jump Start Posts
TopCoat Type ,- PPG Delfleet Polyurethane
Exterior Color Code: White in Color
—
Interior..Color Code: Same as Exterior
Bedliner 130 sft Bedliner Cargo Area sides, floor, top workbench and bump
Shelving 4:.:; -:_.F All shelves havea250lb"capacity rating and are infinitely,adjustable vertically," ;t:
1 ea STI591267 2452/2460, 84 CA, 7 Shelf STD Set Brkts & Hrdwr
1 ea STI512312-1 SHELF, CBNT, 24,14GALV, 53.5 SS1
1 ea STI512312-30 SHELF,CBNT,24,14GALV,50.5 SS2
1 ea STI512312-5 SHELF,CBNT,24,14GALV,29.5 SS3
2 ea STI512312-32 SHELF,CBNT,24,14GALV,33.5 CS2
1 ea STI512312-30 SHELF,CBNT,24,14GALV,50.5 CS3
1 ea SHELF,CBNT,24,10GALV,29.5 CS4
ea
7 ea STI590779 Shelf Installation Kit
Rollouts Height of drawers includes riser to clear bottom jamb: l ` , ;?.
2 ea STI592632-3 AE Drawer Riser Kit 18" SS1
Page 1 of 7
Costa Mesa 2452 750 XLT level 3 Printed on 6/5/2013 at 7:52 AM
1 ea J STI702475 Rollout Drawer, 7 x 18W x 18D -3,3,3,5,5,5,7 Height= 35.4" SS1
1 ea STI702476 Rollout Drawer, 7 x 30W x 18D-3,3,3,5,5,5,7 Height= 35.4" SS1
1 ea STI702478 Bolt Bin, 15 x 5W x 3H with 8x4 Drawers x 18D Height= 16" CS3
ea
Cabinet Accessories
1 ea STI590786 J Hook- Bolts to Cabinet Wall CS1
1 ea STI592450 Cover,Jamb,SS,2452/60,84CA,KIT
2 ea STI593106 Cord Holder-Bolts to shelf rails SS3
ea
Lightin• &Electrical
1 ea STI593359 Interior High Intensity LED strip lighting -84 CA
4 ea STI591610 12 v 3X5 Work Light-Exterior Mounted, controlled in cab
1 ea STI593091 2 Strobe Kit- Whelen Super LED Flat Lens Amber x 4" Round
- Rubber Grommet Mounted
ea
Ste is ,
2 ea STI590783 Rubber Bolt On I I I
Head ate "'
STI591169 28" High Slide In Headgate
Tail ate
1 ea STI592558 12" Folding Tailgate with Polished Latch -2452/60 CS Crane I I I
Hitch & Trailer Plug''';Y° .' . 2"RECEVER STANDARD ON THIS TRUCK
1 ea STI591028 Trailer Socket-7 Blade RV Style- Plastic I I
Miscellaneous
STI592690 2452 Bolt on Headache Rack I I I
Air Tanks
1 ea STI590904 22.5 Gal UnderBody for Recip Comp (Inbetween Rails) I I I
Air/Water Reels
1 ea STI591403 1/2 x 50 Rear Access Air Reel & FLR ICS4 1 I
Hydraulics
EMI PTO Hot Shift-2 or 3 Series Allison
Hyd Puni a - I
1 ea Single Output Hydraulic Pump for crane or compressor. Any
make/model.
Reservoir
Costa Mesa 2452 750 XLT level 3 Page 2 of 7
Printed on 6/5/2013 at 7:52 AM
33 Gal Headgate Reservoir(Single Pump System)- Includes 10
1 ea STI591718 micron return filter, drain valve and level guage with thermometer.
Reservoir is filled with Petro Canada Hydrex AW 46.
CRANE ;
1 ea 1061-6 Model 1061 Hydraulic crane. 11,000 lbs capacity, 21'of hyd reach, 60'
no load single line speed, Auto 2 speed, 6 function full wireless
proportional trigger control, 9 micron absolute filtration, 400 degree
rotation, Anti-two-block and overload protection. Ready for installation
on STI body. Painted Body color.
C a e Saddle `, I
Ma STI592699 Hex Boom Crane Saddle
Crane Installation Kits(Needed for hydraulic cranes only) -
III STI591592 Hyd Installation Kit for all hydraulic cranes with hydraulic outriggers
Crane Options -a, t.
Engine Start& Rem Comp Contro-Automatic Transmission
Power Accessories . `
Gas Driven Welders ,„-:;LL
Miller Trailblazer 302 Air Pak-Kohler Gas w/Electric Fuel Pump
1 ea STI703266 300 Amp/11 Kw, 31 CFM screw compressor& 12/24 Charge/Jump
Start 907-549 (Net Price Only)
Welder Accessories
11 1/0 Quick Connect Stick Weld Kit- 100'cable, ground & holder. 300
Amp Cont, 400 Amp Intermittent. Includes Tweco connectors for
STI593333
quick welder to lead connection. Use on exterior mounted welders.
(Net)
STI703401 Miller AirPak Jumper Cables-25 ft
Installation .
1 ea STI590951 On Cabinet or Deck Installation Kit- Miller SS
250D & 302D &AP Ext
ea
Miscellaneous
STI592133 TEM Hyd 3000PSI Pressure Washer
SS3
Lu ui• e t . _ ; - ,x
Page 3 of 7
Costa Mesa 2452 750 XLT level 3 Printed on 6/5/2013 at 7:52 AM
Tanks Waste tanks are considered empty for weight calculation
1 ea STI593013 Tank,100 Gal,Water,Coolant,DEF, Poly (Deck
Nlisc Reels &Hose '
1 ea STI701842 Reel,HP Water,R,3/8,50',4000 PSI SS3
Options a
1 ea Arrow Traffic Advisor Directional Light placed on top of
Headacke rack
1 ea Cone holders on rear SS WB WB
2 ea STI5934236 Chock Holders and Wheel Chocks Kit Underbody mount
1 ea Tool box holder under crane on top CS Cabinet
43 " Long x 8" High x 24"Wide Open Tool Storage
Drain Holes included
Est Net Payload (Ibs)
3,436
Page 4 of 7
Costa Mesa 2452 750 XLT level 3 Printed on 6/5/2013 at 7:52 AM
Distributor Customer
Service Trucks International COSTA MESA SANITARY DISTRICT State
accept the terms of this document, authorizing processing of quote total, approving and layout California
the drawing#'s as specified, and acknowledgement of unit weight or payload oprrsuit suitability of purpose, per
please sign this page, and return copy. Terms are as follows:
Delivery: Final completion date is determined only upon receipt of downpayment and may vary from
date quoted. Whether the chassis for this sale is customer or STI vendor arranged and provided, STI
is not responsible for the delivery performance of the chassis provider, or its potential impact on
unit completion date.
Payment: Balance is due upon receipt of unit, or invoice, whichever occurs first.
Service Trucks International Subtotal $140,368.14
Net Total For Package $140,368.14 Total of unit less deposit&
(Customer may be responsible for additional tax upon licensing of vehicle)TaX
delivery cost
Freight to Costa Mesa from factory $2,950.00`Total Frei ht to Costa Mesa
GOOD FAITH CHECK SUBMITTED WITH PURPOSAL g
$14,331.81 Total deposit submitted?
TOTAL DELIVERED TO COSTA MESA SANITARY DISTRICT $157,649.95 Grand Total
Costa Mesa P.O.with signed STI agreement needed if we are the bid selection
Quote is for 1 unit(s).
n If box is checked, the chassis represented is sold as is, where is, with no warranty.
This unit may contain fliud reservoirs, which, if filled with certain fluids, may require "Hazardous Material"labeling/decals.
It is the owner's responsibility to affix all related labels/decals required by any federal or state law, and to comply with, and
be properly licensed for,federal and state regulations governing usage of this unit in all of the operator's applications.
Asday's Date: `7�-3(,-f3
1, �� , ,
,
of 47 c COSTA ESA SANITARY DISTRICT
ld authorize the purchase of the above service body,
, agree to the terms as stated above,
r- ^^ \`-k 0 y, per print#'s VIEWS
PO# �i"�U
From Service Trucks International
For Office Use Only '
Cust No. I ;Build Type T
} User I j
Body Mod i Serial#1
Trans Type; 1 Area
r
Crane Mod I I Serial#I Nett
4.
Chassis Intl I I Order#; ; ; 1 ;
COP# i Code; I
Ship Date; I ;
' I Other;
Costa Mesa 2452 750 XLT level 3 Page 5 of 7
Printed on 6/5/2013 at 7:52 AM
•
DWG. "°' STI\OT\100295A ' REVISI❑NS IREV
DO NOT SCALE DRAWING ECN IREV I DESCRIPTION I DATE I. BY I CHK
BOLT ON LED
HEADACHE -_ TRAFFIC
RACK ADVISOR c P
® MILLER
302 AIR PAK
I ..
tb- .0. . . ID t H .
II
III CONE
— 11 11 11 HOLDER
r
la
::1 6i■el 31 .
7 I 46_
......52 \ / I I--
\ / I1 I
ROLLOUT
DRAWERS —/ \ PRESSUIJC1 ` /7 25
1 // \\ WHEEL I WASHERS I ® } 1 7
/ CHOCK to i 1Q R N1 +
54 51 I _ — 1
I r-- 30 - 22 �{
84 CA a - 33 -
I- 135
1- 168 -
DRAWN MD DATE 6-13 RTYSERVICE TRUCKS INTERNATIONAL
•DIVISION OF SIOUX AUTOMATION CENTER,INC.
NOTE: ALL DIMENSIONS ARE OUTSIDE CHECKED DATE 877 FIRST AVE NW SIOUX CENTER, IOWA 51250
DIMENSIONS AND ROUNDED TO COSTA IVES A
THE NEAREST WHOLE NUMBER SCALE 1: 28 BREAK ALL EDGES
.03 X 45•
DIMENSIONS ARE IN INCHES S A \ I TA R Y DISTRICT
NOTE: ALL CABINETS ARE 24" DEEP, TOLERANCES UNLESS SPECIFIED
FRACTIONAL ± 1/32 3 PLACE ± .005
EXCEPT FOR THE WORKBENCH 2 PLACE ±.020 ANGULAR ± 1• SIZE DWG Na REV
WHICH IS A THRU CABINET. MATERIAL N jA A STI \Q T\10 0 2 9 5 A S
DWG. Na STI\OT\100294A REVISIONS IREV
DO NOT SCALE DRAWING ECN I REV I DESCRIPTION I DATE I BY I CHK
Al, [el: MINT CD
.! ® 4.-- �h�
1/2 x 50 ;'. I 8 il
OPEN TOOL
RC HOSE REEL Wit,' , STORAGE
AIR • • •-91110 43 I1 r�7 .
— i n -OXY/
I I ACT
31 �� \ _ • -=-1 I
O.R. CONTROLS -\ N" 1 �-t=-r-r= -I •-
�,--- ( - - ti;-) 52
60
25 �` I
7 I WHEEL 1
® CHOCK i
I 1 o
l' 1
F-- 22 � 51 - 34 - 20
30
- 33 84 CA
. - 135 -1
- 168 -I
NOTE: FOR 72,000 FTRLBSD DRAVN MD DATE 6-13 "SERVICE TRUCKS INTERNATIONAL
A DIVISION OP SIOUX A(fOI(ATION CXMTR.INC.
NOTE: ALL DIMENSIONS ARE OUTSIDE CHECKED DATE 877 FIRST AVE NW SIOUX CENTER, IOWA 51250
DIMENSIONS AND ROUNDED TO SCALE BREAK ALL EDGES COSTA V E S A
THE NEAREST WHOLE NUMBER 1: 28 .03 X 45'
DIMENSIONS ARE IN INCHES S A\ TA R Y DISTRICT
.
NOTE: ALL CABINETS ARE 24" DEEP, TOLERANCES UNLESS SPECIFIED
FRACTIONAL ± 1/32 3 PLACE ± .005
EXCEPT FOR THE WORKBENCH 2 PLACE ±,020 ANGULAR ± 1'
SIZE DWG HO. REV
WHICH IS A THRU CABINET. MATERIAL
N/A A S T I \Q T\10 0 2 9 4 A S
DWG. N0. STI\OT\100296A REVISIONS I REV
DO NOT SCALE DRAWING ECN I REV I DESCRIPTION I DATE I BY I CHK
CONE
HOLDER
NOTE: AIR TANK UNDERBODY.
` III MILLER '. r,,,,,
302 AIR PAM::;, 3 " 24
I) II _•
fl
I \ / BOLT ON
HEADACHE RACK
1 I � 1• WITH.LED TRAFFIC
BED LINER ON 1� ATER TANK ADVISOR
\FLOOR, SIDES OF r
STROBE vn CABINETS O 51
UGHTS WORKBENCH AND
•
STEP OF ;
I 1 WORKBENCH
L411-....L.111A-01
0 V Y `I
, \ED OPEN TOOL - 2 4
Ili STORAGE W 1
1
f 135 -
168
DRAVN MD DATE 6-13 RTYSERVICE TRUCKS INTERNATIONAL
NOTE: ALL DIMENSIONS ARE OUTSIDE DID
DIMENSIONS AND ROUNDED TO CHECKED DATE •DIVISION smaz.uro� c
877 FIRST AVE N NW SIOUX CENTER, IOWA 51250
THE NEAREST WHOLE NUMBER COSTA Ni E S A
SCALE 1: 28 BREAK ALL EDGES
.03 X 45'
NOTE: TOTAL BODY WIDTH IS 102" DIMENSIONS ARE IN INCHES S A\ I T A R Y DISTRICT
WHICH INCLUDES DRIP RAILS FR CTIONANCESI/32LES 3 PLACEI±I Dos
ABOVE CABINET OPENINGS. PLACE ±,020 ANGULAR ± 1• SIZE DVG ND. REV
MATERIAL
N/A A STI \Q T\10 0 2 9 6 A S
,LMGLEPROTM
= TRUCKS
INTERNATIONAL TIGER
America's Premier Manufacturer 877 1st Ave.NW•Sioux Center,IA 51250 CRANES
of Service Equipment Phone:712-722-722-3711 •Fax:712-722-3706
www.servicetrucks.com CALL TOLL FREE: 1-800-225-8789 www.tigercranes.com
PLEASE REFERENCE OUR BODY SPECIFICATIONS VS. REQUEST OF BID PURPOSAL
EAGLE PRO II 2452 Crane Body Standard Specifications
BID CODES
Body Materials
- 11 ga A60 galvaneal cabinets with continuous weld construction B-1
- 11 ga A60 galvaneal single panel doors with stainless steel hinges B-2
- 11 ga rigidized A60 galvaneal deck plate B-1
- 11 ga rigidized A60 galvaneal cabinet overlay B-1
- Structural tubing long sills run full length B-1
- 10 ga 2x4 formed C channel cross rails on 12"centers B-1
-3/4"plate grade 80 crane base tied to frame with 3 x 5 x %tubing with 2 x 6 x %"tubing strategically placed for support B-1
Body Dimensions
-99"Overall Body Width B-4
-24"Overall cabinet width with 22.5 inside width clearance B-8
-52"Overall cabinet height B-8
-60"Raised Oxygen Acetylene cabinet B-8
-51"x 132"Deck Area B-8
-31"Deck Side Height B-8
-7"Step Treadplate Bumper B-8
-22"workbench with finished full through cabinet ' E-27
Body Features
-Body and crane tower rated at 72,000 ft/lbs moment load thru 400°. B-1
-Crane tower and outriggers will accommodate up to a 72,000-ft/lb crane B-1
-Power out,up,and down outriggers. NEEDED FOR A CRANE BODY' B-1
-Stainless Steel wrap around chip guard full height on front of cabinets B-1
-Full-length rain gutter ' B-10
-Galvanized infinitely adjustable shelving with lips.All shelves have 250#weight cap----100294,100295----SEE SIDE VIEW PRINTS'
-High Performance cabinet air pressurization system B-2
-Oxy/Act cabinet is vented,and includes tank brackets for K bottles B-18
-Large cabinet doors are reinforced with formed C channels B-2
-3 point locking D style door handles made of Stainless Steel and are keyed alike B-3
-Outrigger hoses installed internally to eliminate exposure STANDARD FOR OUR BODY—Not Requested
-(4)Flush mounted cargo tie downs standard on 11'(6)on 13' or larger STANDARD Not Requested
-(2)Stainless Steel grab handles FOR REAR ACCESS B-1
-(2)Stainless Steel spring loaded door holders on the cabinets with+90 degree limiters B-10
-Fold down single handle opening tailgate heavy duty for loading equipment B-1
-Vise mount integrated into body E-26
-Body mounted back-up alarm standard equipment B-11
-Automotive bulb steel backed weather stripping between doors and cabinets B-2
-All wiring is protected in automotive loom (Exterior shrink tube standard)(We offer 5 2-1/2 red clearance placing corner lighting to
Meet DOT standard required)(We offer 5 3"grommets kits)(All wiring in loom is standard)
Centralized Wiring and Breaker Panel protects circuits Standard for our bodies
-Body is fully sanded,chemically washed and prepped prior to paint See paint procedure offered on separate sheet.
-3 Step Paint Process with PPG topcoat–exterior and interior See paint procedure offered on separate sheet
-Body is fully undercoated Standard on our bodies
-Powder Coated accessories Standard on our bodies
-Lights and reflectors are mounted per DOT specifications Standard on our bodies
-2"receiver hitch in bumper with 7 pole trailer plug E-28
-Mud Flaps and Wheel Chocks Holders E-25
- Sainless steel welded on door hinges(doors are removable need be)(No Barn Door style hinges) B-3
-Body Dimensions see prints 100294-100295-100296 for B4,B5,B6,B7,B839,C-14 TO C17,D-18 TO D-23
-Body Includes a tool box holder placed on top of curbside of the body as per spec 100294A B-12
-Review separate chassis description offered by the Ford Motor Company Supplier.
IN CONCLUSION THE SERVICE BODY I AM OFFERING EXCEEDS EVERY
1,2:f.'..7N,!. w
MODEL 1061 ,„,,,,,etri,x,r,
inr,,„v,,,,,,,,
, ,:(1,,,,,,,,,,07:34i4,.. -.\-- TIGER
1 1 CRANES
11000* „ti
21'1" .r .
•z ..i (4989) 1w�W. '�`
i
5881*
j (2667) LOAD CAPACITIES
i POUNDS
(KILOGRAMS)
■
750
4158
(1886)
60°
11000*
12'1" ,z 0. (4989)
two 10262* 45° 3395
i (4654) (1540)
7256*
(3291) 30°
5924* 3044
(2687) (1380)
15°
,/it
5312
(2409)
a
1:10P,C.),, a ogi 0 ci'' ,kg
w.
r■ ■ 5131 2940
(2327) (1333)
0 3' 6' 9' 12'1" 15' 18' 21'1"
DISTANCE (FT.)
* MAXIMIUM SINGLE LINE CAPACITY IS
5500 LBS (2494kg) IN THESE OPERATING POSITIONS
DEC261
TIGER CRAN
877 1st. Ave. NW '
s Sioux Center, IA 51250
�}}}} \1 Toll.Free: 800.225.8789 * Fax: 712.722.3706
wxn+ttigercranes.com A Division of Service Trucks International
Tiger Model 1061 Crane Specifications
General Specifications
-62,000 ft/lb. Crane Rating
-21' Reach
- 11,000 lb Lift Capacity
- 12-21' Hydraulic Boom Extension
-23' Lifting Height(from base of crane)
-41" Storage Height(from base of crane)
- 157" Overall Storage Length
-2070 lbs. Operating Weight
-23"X 30" Mounting Space Required (for base of crane)
-20.4" Rotation Operation Space Required (from Center of Crane)
-8 Bolt Pattern (for base of crane)
- Powder Coated Base, Turret Shield and Inner Boom, with PPG Delfleet Polyurethane paint on remainder of
components
-Standard Wireless Proportional Control with optional engine start and throttle control
-Standard overload protection with overload condition indicator light
-Standard Anti two Block protection with condition indicator light
System Characteristics
- 10 GPM @ 2600 PSI Hydraulic Supply Requirements
-Open Centered, Full Pressure Hydraulic System
- Integrated 9 micron absolute filtration with bypass condition indicator light
- Full proportional input with Auto II Speed Load Sensing Control reduces all function speeds when load is
sensed
-400 Degrees Rotation
- 12 VDC DO3 10 GPM Solenoids With Manual Override
--5 Degrees to +75 Degrees Boom Elevation Positions
-30 Seconds Boom Elevation Speed
-22 Seconds Boom Extension Speed
- 1.4 RPM Rotation Speed
Winch Characteristics
- Hydraulic Planetary Winch
-7/16"X 120'Winch Cable
-60 FPM Single Line No Load Speed
Minimum Chassis/Power Requirements
-25,500 lbs. GVW Rating
- 162"Wheelbase
-84" Cab to Axle
-PTO/Pump Produce 10 GPM @ 2600 PSI
-Heavy Duty or Equivalent Outrigger Recommendation
Notes
-Consult Your Truck Dealer for Specific Payloads and Axle Rating Information Prior to Installation
- Lift and Extension Cylinders are Equipped with Counterbalance Safety Valves
Z:\Engineering\1 Service Trucks\1 Sates sheets\Sales Sheets\Spec Sheets\Tiger Crane Specs\1061 Crane Specs.doc Updated 5/11/06
MO UW MOTOR CO., INC.
Presents...
The 2013 Ford F-750 XLT
Crew Cab
Prepared For: C City of Costa Mesa
Prepared By: Steven Mouw
Prepared On: May 22, 2013
•
Prepared For: Prepared By:
C City of Costa Mesa Steven Mouw
Costa Mesa, California,92628 MOUW MOTOR CO., INC.
1245 N MAIN AVE
SIOUX CENTER, Iowa,51250
Phone: 712-722-0085
Toll Free: 1-800-729-6689
re----
Vehicle Profile 2013 Ford F-750
Crew Cab XLT(W7F)
Powertrain
Cummins 6.7L 1-6 OHV diesel injection 24 valve intercooled turbo diesel engine*185 amp alternator*1,250 amp
(total)93 amp hours(Ah)(total)battery dual batteries located rear left*Engine block heater*6-speed automatic
transmission with overdrive*Rear-wheel drive*5.29 axle ratio, single speed drive axle*Aluminized steel exhaust*
Heated fuel/water separator*Transmission PTO provision*Construction transmission vocation*Standard rear
differential* Right mounted horizontal muffler*Right mounted vertical tailpipe* 18.7 cfm capacity air compressor
system with air dryer, manual moisture ejector*50.0 gal. rectangular left front fuel tank,
•
Steering and Suspension
Hydraulic power-assist re-circulating ball steering*Air brakes*Non-independent front suspension*Front leaf
suspension *Front tapered leaf springs*Rigid rear axle*Rear leaf suspension*Rear multi-leaf springs*Front and
rear 22.5"x 7.50"* 11.0R22.5 AS front tires*M+S rear tires*Rubber auxiliary rear springs*Front and rear white
steel disc wheels with 10 wheel studs
. Safety
4-wheel anti-lock braking system*Front height adjustable seatbelts
Comfort and Convenience
Air conditioning*AM/FM stereo,clock,seek-scan, in-dash mounted single CD, MP3 decoder, SYNC external
memory control,4 speakers,fixed antenna, radio steering wheel controls*Cruise control with steering wheel
controls*Power door locks*2 12V DC power outlets,ashtray,front lighter element(s)location, Bluetooth wireless
phone connectivity, dual electric horn*Analog instrumentation display includes tachometer,oil pressure gauge,
engine temperature gauge, primary air pressure gauge,trip computer,trip odometer*Warning indicators include
battery, lights on, key,service interval, brake fluid,transmission fluid temp*Steering wheel with tilt adjustment*
Power front and rear windows with light tint*Variable intermittent front windshield wipers*Passenger side vanity
mirror* Interior lights include dome light with delay,front reading lights*Mini overhead console with storage,glove
box,front cupholder,dashboard storage,driver and passenger door bins*Air compressor*Automatic gearshift
steering column lever
Seating and Interior
Seating capacity of 6*60-40 folding rear bench seat with fold-up cushion*Cloth faced front seats with carpet back
material*Cloth faced rear seats with carpet back material*Vinyl door trim insert with carpet lower,full cloth
headliner,full vinyl/rubber floor covering, urethane gear shift knob,cabback insulator*Driver and passenger seats
with folding back*4 way driver bucket seat with high back,fore/aft*2 way passenger two person bench seat with
mid back*Driver and passenger fixed headrests
Exterior Features
Front splash guards,composite/galvanized steel body material, side steps*Black side window moldings, black front
windshield molding, black rear window molding*Black door handles*Chrome grille*4 doors* Driver and
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A Page 2
Vehicle Profile Continued Prepared For: C City of Costa Mesa
Prepared By: Steven Mouw
Dealership: MOUW MOTOR CO., INC.
•
Exterior Features (Continued)
passenger manual stainless steel convex spotter west coast outside mirrors* Front chrome bumper with straight
ends,with front tow hooks*Sealed beam halogen headlamps*Additional•exterior lights include cab clearance lights
*Clearcoat monotone paint*Hood mounted grille
Warranty
Basic 24 month/unlimited mileage Corrosion Perforation 60 month/unlimited mileage
Roadside Assistance 24 month/unlimited mileage Diesel Engine 24 month/unlimited mileage
Transmission 36 month/unlimited mileage
Dimensions and Capacities
Output 280 hp @ 2,300 rpm Torque 660 lb.-ft. @ 1,600 rpm
1st gear ratio 3.510 2nd gear ratio 1.900
3rd gear ratio 1.440 4th gear ratio 1.000
5th gear ratio 0.740 6th gear ratio 0.640
Reverse gear ratio 5.090 Curb weight 10,952 lbs.
Front curb weight 6,317 lbs. Rear curb weight • 4,635 lbs.
Front axle capacity 10,000 lbs. Rear axle capacity 21,000 lbs.
Front spring rating 10,000 lbs. Rear spring rating 23,500 lbs.
Front tire/wheel capacity 12,350 lbs. Rear tire/wheel capacity 23,360 lbs.
Front legroom 41.2" Rear legroom 42.8"
Front headroom 41.5" Rear headroom 41.0"
Front hiproom 67.4" Rear hiproom 67.3"
Front shoulder room 68.0" Rear shoulder room 66.9"
Length 282.0" Body width 96.7"
Body height 95.1 " Wheelbase 194.0"
Cab to axle 84.0" Axle to end of frame 49.0"
Radiator area 717.0" Frame rail depth 10.3"
Frame rail width 3.1 " Frame rail thickness 0.38"
Max RBM (in.-lbs.) 1,275,200.0 Frame rail section 9.5"
Turning radius(to curb) 26.8' Turning radius(to bumper) 28.2'
Front frame height loaded 34.9" Front frame height unloaded 37.6"
Rear frame height loaded 35.8" Rear frame height unloaded 39.7"
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A Page 3
,Prepared For: Prepared By:
C City of Costa Mesa
Costa Mesa, California,92628 Steven Mouw
MOUW MOTOR CO., INC.
1245 N MAIN AVE
SIOUX CENTER, Iowa, 51250
Phone: 712-722-0085
Toll Free: 1-800-729-6689
Selected Options 2013 Ford F-750
Crew Cab XLT(W7F)
Vehicle Snapshot
Engine: Cummins(6.7L) ISB 280 HP @ 2300 RPM, Governed @ 2600 RPM
Transmission: Allison 2500 6-Speed, RDS Series On-Off
Rear Axle Ratio: 5.29
Brakes: Air Brakes-Straight Truck w/16.5x7.0 Rear Pads-22.5"Wheels
GVWR: 25,999 lbs
Code Description Class MSRP
W7F Base Vehicle Price(W7F) STD 72,630.00
Engine/Engine Equipment
99E Cummins(6.7L)ISB 280 HP @ 2300 RPM,Governed @ 2600 OPT 3,341.00
RPM
Starting Motor-12-Volt,38 MT,Delco-Remy America Inc.Type 300:Less
thermal overcrank protection.;Radiator-Modine, 717 Sq In Cross Flow,
4.25"Core w/ln-Tank Trans Cooler;Mainshaft Driveline, 1710. Includes Borg
Warner SA75 viscous screw on type fan clutch. Includes Donaldson single
stage dry type air cleaner with restriction indicator. Includes Fleetguard
FS19557, with electric type heater and primer pump-engine mounted
fuel/water separator. 660 lb-ft torque @ 1600 RPM, 2600 RPM governed
speed,280 peak HP(Max). Component-manufacturer warranty applies.
. Subject to change by manufacturer without notice. Torque:660 ft.lbs.@
1600 rpm.
41G Engine Block Heater, Phillips, 120 Volt/750 Watt OPT 49.00
631 CARB Clean Idle Label on Hood-Required for registration in OPT N/C
CA,CT, DE, GA, ME, NJ, NY, NC,and PA
425 50 State Emissions OPT N/C
Allison Vocational Transmission
44F Allison 2500 6-Speed, RDS Series On-Off STD N/C
RDS Series On-Off,Synthetic Transmission Oil;20 thru 28 Pints-Meets
Allison TES295 Specification;GVWR Limit:33,000 lbs.4th Generation
Controls;Wide Ratio, 6-Speed, With Double Overdrive;With PTO Provision,
Less Retarder,14fith 33,000-lb GVW&GCW Max. On/Off Hwy.
Transmission/Clutch
52P Mainshaft Driveline,SPL140 ILO 1710 Series OPT 183.00
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A
Page 4
Selected Options Continued Prepared For: C City of Costa Mesa
Prepared By: Steven Mouw
Dealership: MOUW MOTOR CO., INC.
Code Description Class MSRP
Brakes/Brake Equipment
67C Air Brakes-Straight Truck w/16.5x7.0 Rear Pads-22.5"Wheels OPT 1,341.00
Air Compressor,Cummins, 18.7 CFM Capacity.Mentor Q-Plus with ABS,
Bendix Anti-Lock Brake System,4-channel. Includes 15"x 4"front brakes,
dual direct reading air pressure gauges,front and rear dust shields,brake
lines color coded nylon,instrument panel mounted yellow knob parking
brake control valve,automatic slack adjusters front and rear,two rear spring
parking brake chambers mounted on front of rear axle,three drain valve(s)
and two air tanks(Reference Body Builders Book for location). Rear brake
size and components dependent upon axle selection.
62D Air Dryer, Bendix AD/IP w/Heater,Standard Position OPT 457.00
Automatic drain valve includes Bendix DV-2 w/heater. Mounted inside left
frame rail,back of cab.
Axle, Front/Suspension, Front
43H I-Beam Type-10,000 lb.Cap. Non-Driving-Mentor STD N/C
MFS-10-122A
Steering Wheel-Two Spoke,Black PVC, 17.5"Dia.:Includes Ross TAS-66
power steering gear.
61C Taper-Leaf Springs, Parabolic-10,000 lb.Cap STD N/C
Includes shock absorbers.
Axle, Rear/Suspension, Rear
X5B 5.29 Axle Ratio OPT N/C
475 21,000 lb.Single-Speed-Mentor MS-21-14X-3DLF STD N/C
Single reduction with 190 wheel ends. NOTE:When specifying an axle
ratio,check performance guidelines for startability and gradeability.
68R Multi-Leaf Springs-Vari-Rate Suspension 23,500 lb.Cap STD N/C
Includes 4500 lb.auxiliary rubber spring.
Front Wheels/Tires
647 Wheels, Front 22.5x7.5 Powder Coated Steel Disc, 10-Hole STD N/C
(285.75MM BC)hub piloted,flanged nut,5 hand hold,metric mount, 7.50
DC rims;with steel hubs, white.
TC1 Tires, Front Two 11R22.5G Michelin XZE2(502 rev/mile) OPT 244.00
Rear Wheels/Tires
667 Wheels, Rear 22.5x7.5 Powder Coated Steel Disc, 10-Hole STD N/C
(285.75MM BC)hub piloted,flanged nut,5 hand hold,metric mount, 7.50
DC rims;with steel hubs, white.
•
RCS Tires, Rear Four 11R22.5G Michelin XDE M/S(497 rev/mile) OPT 463.00
Wheelbase
194WB 194"Wheelbase/84"CA/49"AF/282"OAL STD N/C
Frame
20Y Special Rating GVWR-Limited to 25,999 lb.GVWR OPT 61.00
535 Single Channel-Straight'C' 15.14 SM,80,000 PSI-For GVW OPT N/C
Ratings 33,000 lbs. Maximum
High strength low alloy steel; 10.250"x 3.092"x 0.375"(260.4mm x 78.5mm
x 9.5mm),437.9"(11122mm)maximum OAL.
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
•
Price Level:315 QuotelD:0484A
Page 5
Selected Options Continued Prepared For: C City of Costa Mesa
Prepared By: Steven Mouw
Dealership: MOUW MOTOR CO., INC.
Code Description Class MSRP
Exhaust
91 D Under Cab,Vertical Outlet, Right Side OPT 207.00
Single,horizontal,diesel particulate filter assembly,frame mounted outside
right rail under cab,single horizontal SCR assembly,frame mounted outside
right rail under cab,right side mounted vertical tail pipe and guard.
Fuel Tanks
86H 10 Gallon Urea Tank •STD N/C
Mounted R/H rail,under cab.
10 Gal.Single Tank Fuel Fill. Mandatory Charge Applied, Based OPT 0.00
On Tank Selection
65S Tank-Steel(Deep)50 U.S.gal.(189 L.)-Single OPT 213.00
LH D-style steel,top draw, 16"tank depth,mounted left side under cab in
front of battery box. Includes under cab mounted exhaust system.
Electrical/Alternator/Battery
17B 185 Amp, Leece-Neville 12-Volt, Brushless, Pad Mounted, STD N/C
Alternator
63A Two-625 CCA, 1250 Total, Includes Steel Battery Box and STD N/C
Plastic Lid
12Volt,Motorcraft.
59C Body Builder Wiring-To End of Frame OPT 134.00
Includes sealed connectors for 2 ground circuits,with combined left/stop,
combined right/stop,stop lamps,back up lamps. Also includes 2 additional
pass through wires to cab.
Seats
85T 2 Passenger,70%Bench, Folding,Steel Gray Cloth w/Steel INC Included
Gray Cloth Insert
Intermediate folding back,integral outboard headrest,fold down single
armrest,inboard,with cupholders. .
87H Rear Bench, Steel Gray Cloth INC Included
60/40,flip-up cushion/fold down back.
88R Driver, Bucket Seat, 30%, Reclining,Steel Gray Cloth w/Steel INC Included
Gray Cloth Insert
Fixed track with fore aft adjust,high back with integral headrest and single
armrest,inboard. Seats are color coordinated to cab trim level. All seats
include seat belts.
Cab Equipment
586 Radio for SYNC Application-AM/FM Stereo w/Single CD&Clock OPT N/C
with MP3 input
682A XLT Trim Package OPT N/C
(88R)Driver,Bucket Seat,30%,Reclining, Steel Gray Cloth w/Steel Gray
Cloth Insert:Fixed track with fore aft adjust,high back with integral headrest
and single armrest,inboard. Seats are color coordinated to cab trim level.
All seats include seat belts.;(857)2 Passenger, 70%Bench,Folding, Steel
Gray Cloth w/Steel Gray Cloth Insert:Intermediate folding back,integral
outboard headrest,fold down single armrest,inboard,with cupholders. ;
(87H)Rear Bench,Steel Gray Cloth:60/40,flip-up cushion/fold down back.
Includes molded cloth headliner,RH and LH coat hooks,sunvisors with
passenger side mirror,overhead console with dual sun glass bins and
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A Page 6
Selected Options COittliitied Prepared For: C City of Costa Mesa
Prepared By: Steven Mouw
Dealership: MOUW MOTOR CO., INC.
Code Description Class MSRP
integral map lights,molded door trim panels with upper and lower map
pocket with soft foamed arm rest,color keyed molded cloth back panel,
manual air conditioning with chrome vent trim, West Coast mirrors with 8"
dia.RH&LH convex spotters,power equipment group,front tow hooks,
bright front headlight bezel,chrome grille and chrome front bumper. Steel
gray interior color.
54A Mirrors, Dual Stainless Steel-Rectangular,7 1/2"x 16 1/2" STD N/C
West Coast style, 102"wide spacing.
54C Mirrors,2 Auxiliary Convex-Stainless Steel OPT N/C
8"dia.,mounted below primary mirrors.
21D SYNC Media System OPT N/C
Includes dash mounted USB 2.0 port and SYNC controls in steering wheel.
Interior Colors For : Primary w/XLT
E Gray OPT N/C
Primary Colors For: Primary w/XLT
YZ Oxford White OPT N/C
Vehicle Subtotal $79,323.00
Destination
$1,495.00 •
Vehicle Subtotal (including Destination) $80,818.00
•
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A Page 7
•
Prepared For: Prepared By:
C City of Costa Mesa Steven Mouw
Costa Mesa,California, 92628 MOUW MOTOR CO., INC.
1245 N MAIN AVE
SIOUX CENTER, Iowa,51250
Phone: 712-722-0085
Toll Free: 1-800-729-6689
Quotation 2013 Ford F-750
Crew Cab XLT(W7F)
Vehicle Snapshot
Engine: Cummins(6.7L) ISB 280 HP @ 2300 RPM, Governed @ 2600 RPM
Transmission: Allison 2500 6-Speed, RDS Series On-Off
Rear Axle Ratio: 5.29
Brakes: Air Brakes-Straight Truck w/16.5x7.0 Rear Pads-22.5"Wheels
GVWR: 25,999 lbs
Description MSRP
Vehicle Price(excluding option discounts) $79,323.00
Vehicle Subtotal $79,323.00
Option Credits 0.00
Dealer Outright discount (9,488.00)
Government Price concession (7,500.00)
Other(Discount)Margin 0.00
Incentives 0.00
Total Other Items (16,988.00)
Net Selling Price $62,335.00
Destination 1,495.00
Total Quote $63,830.00
TOTAL $63,830.00
Customer Signature
Acceptance Date
Prices and content availability as shown,are subject to change and should be treated as estimates only.Actual base vehicle,package and option pricing may vary from this
estimate because of special local pricing,availability or pricing adjustments not reflected in the dealer's computer system.See salesperson for the most current information.
Reference CT05206272 10/29/2012
Printed on May 22,2013 at 11:20
Price Level:315 QuotelD:0484A Page 8
1
" America's Premier Manufacturer
a SERVICE of Service Equipment s�ovx
nCroranmmce. LVC
INTER NATIONAL 877 1st Ave.NW•Sioux Center,IA 51250
Phone:712.722-3711•Fax:712-722-3706•CALL TOLL FREE 1-800-225-8789
A Division of Sioux Automation Center,Inc. www.servicetrucks.com
SERVICE BODY WARRANTY
(NON-TRANSFERABLE)
S.T.I.Limited 5-Year Non-Rust-Through Warranty:
— S.T.I. hereby warrants this service body against rust-through, to the original purchaser, for a period not to exceed
5-years from date of original purchase.
— Product must be properly maintained and serviced under the guidelines of the owner's manual.
— Applies to the body only and excludes options,modifications,and alterations.
— Exclusions:
• Products that have been used to carry corrosive materials,where such materials result in rust-through
conditions.
• Products purchased by the first owner/user in a"primed only"condition.
• Consequential damages including,but not limited to,transportation costs,profit and loss of income as a
result of a vehicle being out of service.
S.T.I.Limited 3-Year Paint Warranty:
The PPG Paint Performance Guarantee will cover the areas of the Service Body finished with PPG specified products for
a period of 3-years beginning the day the vehicle was delivered from the PPG Certified Original Equipment
Manufacturer to the vehicle owner.The refinished areas,as outlined on the guarantee certificate,will be covered.
This paint performance guarantee is a pro-rated warranty.This warranty is at 100%for the first year of ownership,at
75%for the second year of ownership,and 50%for the third year of ownership.
Warranty protection assumes the exercise of "normal" care and maintenance by the original purchaser. Timely and
regular cleaning of the equipment, and the application of provided" touch-up" paint to potential paint chips, can
prevent/eliminate most paint deterioration to the equipment.
S.T.I. Limited 1-Year Warranty:
Service Trucks International"S.T.I."warrants each new S.T.1.Service Body to the original purchaser to be free,under
normal use and service,front defects in material and workmanship,for one-year from date of original purchase.
This warranty,as described above,is expressly limited to the repair or replacement of parts proven to S.T.I.'S
satisfaction to be defective.S.T.I.will pay standard freight expenses of warranty parts between the customer and S.T.I.'s
factory in Sioux Center,Iowa.Expedited freight service,if desired,will result in the owner paying the difference
between standard freight and the customer preferred/requested method of shipment.ALL WARRANTY DECISIONS
ARE FINAL!
Freight of whole goods to or from the S.T.I.factory is the sole responsibility of the customer,regardless of whether the
whole good is being transported for warranty consideration or service.
This warranty does not cover the cost of labor,parts or transportation charges when the replacement or repair of parts
claimed to be defective is performed by any party other than S.T.I., nor shall this warranty apply to an S.T.I. product
upon which any alterations or repairs other than normal maintenance have been made without the written approval of
S.T.I.
S.T.I.shall in no event be liable for consequential damages,lost profits or contingent liabilities arising out of the failure of
any S.T.I.product or parts to operate properly.
THIS WARRANTY IS EXTENDED ONLY TO THE INITIAL PURCHASER FROM S.T.I., AND MAY NOT BE
REASSIGNED. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FOR A PARTICULAR
PURPOSE AND S.T.I. NEITHER ASSUMES OR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY
OTHER LIABILITY. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE
FACE HEREOF.
WARRANTY REGISTRATION MUST BE COMPLETED AND RETURNED TO THE S.T.I. FACTORY WITHIN 15-
DAYS OF RECEIPT OF THE EQUIPMENT,TO INSURE WARRANTY COVERAGE.
We reserve the right to make improvements to any of our products without notice or obligation regarding models or products previously
sold.
SERVICE BODY SERIAL# Effective 09/02
{
.,- a c 'c` }e "t i )2 i w d z ro;4 _r7 n _ z } f'r
SERVICE TRUC #INTIJ¢
TIGER CRANE WARRANTY
.S T L warrants to consumer,each new S T I/Tiger Crane sold by it to be`free,`,under normal
' use and service,from defects in material and workmanship`Terms of warranty are '"
3 F SRS .From date of sale to"the Original Purchaser base phiIc %%eldment,turret
asserribly and.structual integrity:of the n
crae boom assembly. # ▪ R
1 YFAR From date of sale to the 0,f,igin4f Purchaser electrical& hydraulic components
This�warranty,as described above,is eXpressly}limited'tothe repair.or at S T I;'S option,
replacement or parts proven to S.l I 'S;satisfaction to be defective which'are returned;`F O B Y
:customer location =All parts which are¢repaired or replaced under the terms of`thrs warranty
will be shipped,F.O B •'Destination,fromS T l.'S factory in Sioux-Center,IA .STI will pay A▪ :, '
standard freight,expense of parts.to and froni�the owner Faster freiglitIservice`is available, {
withthe owner paying the difference between'standard and preferred
n'Freight of s me} thod of owner
whole goodto''or m the y theowner<s xpense,reg ardless ifthey:fall
under warranty or..not ,:All warranty decisions will tie final: .
This warranty does not,cover the=cost of labor.partsyor transportation charges=when any ' .
party`othe'r`than.S.T I performs;the,replacement orrepair`of parts claimed to,be defective,
`nor shall this warranty#apply to'an S T I product upon which any`}alterations or repairs otherq
than normal.mamtenance have been made without the written approval of S T.I. _ `,
S T I.shall in no event he liable for consequential damages glost profits or contingentliabdities,
arising out of the failure.of any.S T I productaor.parts to operate properly
f S a
WARRANTY CARD:MUST BE FILLEDOUT ANI):RETURNED TO'FACTORY'
•11V4MEDIATELY;UPON`RECEIPT OF EQUIPMENT TO INSURE WARRANTY
,COVE1tAGE st
'THIS`WARRANTY IS°EXTENDED ONLY TQ THETNITIAL PURCHASER FROM AN
AUTIIORIZED S.T L%TIGER(RANEADISTRIBUTOR AND MAY NOT BE,REASSIGNE• D F
THISWARRANTY.IS EXPRESSLY I1V LIEU OF'ANY OTHER WARRANTIES ;.
EXPRESSED ORIIVIPLIED INCLUDINGANV IMPLIED WARRANTIES OF '" • �`
:MERCHANTABILITY OR FORA PA RTICULAR-P; $.1.I.NEITHER{
ASSUMES OR AUTHORIZES ANY:OTHER PERSON T�OASSUME,FOR IT'ANY OTHERf
LIABILITY:�,TIHERE'.ARE No WARRANTIES,WHICH,;EXTE`ND'BEYONI)=THE x F x4
DESCRIPTION OF THE`FACE')3EREOF' ' °f .. ' ' ' f. '
rWe reserve the right to:make nnpro :eirients to anvot our.products without notice or
obligation regarding models previously,sold
CRANESERIAL'#. ,' _ "£ Effective 08/01• ``
-� �# '.fib' . - t. , &e".'f - ., , t �r.�^a , }, ,.r
Scott Carroll
From: Jim E. Berkenpas <jeberkenpas @servicetrucks.com>"
Sent: Monday, August 05, 2013 10:36 AM
To: Scott Carroll
Cc: Mickey J.Visser
Subject: RE: STI PO
Sounds good.
Thanks much,
Jim
Original Message
From:Scott Carroll [mailto:scarroll @crosdca.gov]
Sent: Monday, August 05, 2013 12:33 PM
To:Jim E. Berkenpas
Cc: Mickey J.Visser; Stacey Cuevas
Subject: RE: STI PO
Jim,
I spoke with my Finance Manager and we decided it will be easier to submit one check to STI. You will send us an
invoice for$143,317.74 and then CMSD will send you a check for$157,649.55. The check stub will identify the unit cost
($143,317.74) and the Guarantee of Good Faith deposit refund ($14,331.81).
Sound good?
Scott Carroll, SDA
General Manager I Costa Mesa Sanitary District I Website: www.cmsdca.gov
phone: 949.645.8400 I email: scarroll@cmsdca.gov
628 W. 19th St, Costa Mesa CA 92627
Original Message
From:Jim E. Berkenpas [mailto:jeberkenpas @servicetrucks.com]
Sent: Monday, August 05, 2013 10:21 AM
To: Scott Carroll
Cc: Mickey J.Visser
Subject: FW: STI PO
Scott,
Forgot to mention. I wanted to reconfirm our understanding that the deposited amount of$14,331.81 for P.O.
#00001407 will be refunded upon receipt of completed and accepted unit when delivered to your facility, or will this be
added to the total when payment occurs?
Thanks,
Jim
Original Message
From:Jim E. Berkenpas
Sent: Monday, August 05, 2013 11:58 AM
1
To: 'Scott Carroll'
Subject: RE: STI PO
Scott,
Thanks very much,we will get rolling on this today.
Jim
Original Message
From: Scott Carroll [mailto:scarroll @crosdca.gov]
Sent: Monday, August 05, 2013 11:54 AM
To:Jim E. Berkenpas
Subject: FW: STI PO
Jim,
Attached is the fully executed District PO.
Scott Carroll,SDA
General Manager I Costa Mesa Sanitary District I Website: www.crosdca.gov
phone:949.645.8400 I email: scarroli @crosdca.gov
628 W. 19th St, Costa Mesa CA 92627
Original Message
From: ITRoomCopier @crosdca.net [mailto:ITRoomCopier @crosdca.net] On Behalf Of ITRoomCopier@
Sent: Monday,August 05, 2013 12:40 PM
To: Noelani Middenway; Scott Carroll
Subject: STI PO
Reply to: ITRoomCopier @crosdca.net<ITRoomCopier@cmsdca.net> Device Name: Not Set Device Model: MX-4111N
Location: Not Set
File Format: PDF(Medium)
Resolution: 200dpi x 200dpi
Attached file is scanned image in PDF format.
Use Acrobat(R)Reader(R)or Adobe(R)Reader(R)of Adobe Systems Incorporated to view the document.
Adobe(R)Reader(R) can be downloaded from the following URL:
Adobe,the Adobe logo, Acrobat,the Adobe PDF logo, and Reader are registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and other countries.
http://www.adobe.com/
2
Scott Carroll
From: Jim E. Berkenpas <jeberkenpas @servicetrucks.com>
Sent: Tuesday, July 02, 2013 5:21 AM
To: Scott Carroll
Cc: Steve Cano
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Attachments: Costa Mesa 2452 750 XLT level 3 pdf.pdf
Scott,
Thanks Scott. I will be looking for the signed P.O. contract. One item for internal use on my end is what Steve and I
discussed a couple weeks ago, when we both went over the quote line for line. I will need someone to sign page 5 of 7
in my quote sheet and possibly sent along with the P.O. or separate, doesn't matter, to make sure we are both working
with the same print copies 100294A-100295A-100296A. Other than that, we should be good to go on this unit.
Thanks again,
Jim
From: Scott Carroll [mailto:scarroll @crosdca.gov]
Sent: Monday, July 01, 2013 4:59 PM
To: Jim E. Berkenpas
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Thanks. Now I just need the PO contract signed and returned to me.
Scott Carroll
General Manager I Costa Mesa Sanitary District I Website:wvvw.crosdca.gov
phone:949.645.8400 I email:scarroll@cinsdca.gou
628 W.19th St,Costa Mesa CA 92627
so4J i t �,0 a rsr;4c�
From: Jim E. Berkenpas [mailto:jeberkenpas @servicetrucks.com]
Sent: Monday, July 01, 2013 1:51 PM
To: Scott Carroll
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Per our conversation.
Thanks,
Jim
From: Scott Carroll [mailto:scarroll @crosdca.gov]
Sent: Monday, July 01, 2013 12:08 PM
To: Jim E. Berkenpas
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Jim,
1
Attached is the PO Contract for the utility truck. Please sign where it says "ACCEPTED BY", and then return to me by
next Monday,July 8th. If you have any questions, please don't hesitate to contact me.
Scott Carroll
General Manager I Costa Mesa Sanitary District I Website: www.crosdca.gov
phone:949.645.8400 I email:scarrollncinsdca.gov
628 W. 19th St,Costa Mesa CA 92627
zo1T box * I
lJrr- Asti . . .
'44 4.1KOR
From: Jim E. Berkenpas [mailto:jeberkenpas@ servicetrucks.com]
Sent: Monday, June 24, 2013 2:34 PM
To: Scott Carroll
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Scott,
Hi Scott, thanks for your reply. I was told a week earlier that we only had a couples weeks left for ordering 2013 750
Fords, so we are grateful for little things going our way. You will recognize on Page 1 of S that we show an Est. Lead
Time of 90 days which is from the receipt of P.O. and then shipping commences. Hopefully we will be able to finish it
sooner, however the chassis has to be in our possession for at least 2 weeks in order for us to finish up in
mounting, testing and assembly.
Thanks,
Jim
From: Scott Carroll [mailto:scarroll@crosdca.gov]
Sent: Monday, June 24, 2013 4:14 PM
To: Jim E. Berkenpas
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Jim,
I received your voicemail. That's good news from Ford.
How many days will it take to manufacture and deliver the vehicle to CMSD?
Scott Carroll
General Manager I Costa Mesa Sanitary District I Website: www.cmsdca.gov
phone:949.645.8400 ( email:scarroll@crosdca.gov I
628 W. 19th St,Costa Mesa CA 92627
{zA s,i.w)ri C.CSE Dasp1
• fit:
As x f
2
From: Jim E. Berkenpas [mailto:jeberkenpas@servicetrucks.com]
Sent: Friday, June 14, 2013 5:11 AM
To: Scott Carroll
Cc: Mickey J. Visser
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Mr. Carroll,
Your calculation is 100%correct! On other bids, I have been asked to include the retainer amount with the final bid
separating it out such as I did on this quote. Once the unit passed inspection on delivery the grand total was submitted
would be the only difference. Your choice.
Thanks,
Jim Berkenpas
From: Scott Carroll [mailto:scarroll(acrosdca.gov]
Sent: Thursday, June 13, 2013 5:04 PM
To: Jim E. Berkenpas
Subject: Bid No. CMSD-01-13 - Utility Truck with Crane
Mr. Berkenpas,
Thank you for your bid for the above referenced subject. According to the Bid Form,your bid of$157,649.55 includes
the Guarantee of Good Faith deposit of$14,331.81. The purpose of the deposit is to ensure the utility truck meets the
items specified in the bid. When the truck is delivered and staff has determined that the truck meets our request then
the District will return the deposit to STI.
So,given the fact that the deposit is not for the District to keep, unless STI fails to deliver the utility truck specified, is the
actual bid for the utility truck$143,317.74 ($157,649.55 -$14,331.81)? Please advise. Thanks
Scott Carroll
General Manager I Costa Mesa Sanitary District I Website:www.cmsdca.gov
phone:949.645.8400 1 email:scarro/10emsdca.gov 1
628 W. 19th St.Costa Mesa CA 92627
cl,01 Dist,
cs
400 ,‘ Cy
o' x
.,. , 44,,, _ b At, '-i
l
r4P1 X41 41 �f ie
3
Scott Carroll
From: Jim E. Berkenpas <jeberkenpas @servicetrucks.com>
Sent: Friday,June 14, 2013 5:11 AM
To: Scott Carroll
Cc: Mickey J.Visser
Subject: RE: Bid No. CMSD-01-13 - Utility Truck with Crane
Mr. Carroll,
Your calculation is 100%correct.' On other bids, I have been asked to include the retainer amount with the final bid
separating it out such as I did on this quote. Once the unit passed inspection on delivery the grand total was submitted
would be the only difference. Your choice.
Thanks,
Jim Berkenpas
From: Scott Carroll [mailto:scarroll(acrosdca.gov]
Sent: Thursday, June 13, 2013 5:04 PM
To: Jim E. Berkenpas
Subject: Bid No. CMSD-01-13 - Utility Truck with Crane
Mr. Berkenpas,
Thank you for your bid for the above referenced subject. According to the Bid Form,your bid of$157,649.55 includes
the Guarantee of Good Faith deposit of$14,331.81. The purpose of the deposit is to ensure the utility truck meets the
items specified in the bid. When the truck is delivered and staff has determined that the truck meets our request then
the District will return the deposit to STI.
So, given the fact that the deposit is not for the District to keep, unless STI fails to deliver the utility truck specified, is the
actual bid for the utility truck$143,317.74 ($157,649.55 -$14,331.81)? Please advise. Thanks
Scott Carroll
General Manager I Costa Mesa Sanitar=y District I Website: www.crosdca.gov
phone:949.64 .8400 I email:scarroll acnisdca.gou i
628 W.19th St,Costa Mesa CA 92627
3 Aa A x
'„: `�.°iteiesi
1